Products
-
FV-600 Series Four Eccentric Pile Driving/Extraction Machine
-
Taiwan PCF-450 series pile driving/extraction machine
-
Mini pile driving/extraction machine FV-150 series
-
FV-800 Series Four Eccentric Pile Driving/Extraction Machine
-
High Frequency Vibrating Hammer FV-400
-
HDY5 Hydraulic Impact Hammer
-
SV-500 Series Side Clamping Pile Driving/Extraction Machine
-
Taiwan PCF350 Series Pile Driving/Extraction Machine
-
FV-250R Series 360° Rotating Pile Driving/Extraction Machine
-
SV-300 Series Side Clamping Pile Driving/Extraction Machine
-
FV-280R Series 360° Rotating Pile Driving/Extraction Machine
-
Electric Vibrating Hammer DZ150A
-
High Frequency Vibrating Hammer FV-350
-
FV-330 Series Photovoltaic Pile Driving/Extraction Machine
-
Electric Vibrating Hammer DZ60A
-
Electric Vibrating Hammer DZ90A
SV-200 Series Side Clamping Pile Driving/Extraction Machine
Lateral double grip architecture
Specialized vibratory hammer for low floor heights
Two-way tilt ±30°
Dual-circuit clamping system (side + bottom)
Possibility of installing piles under obstacles
Continuous 360° rotation with tilt
Integration with 20–25 t excavators
Factory minimum modification for installation
Description
marker
YEKUN Weiboro SV-200 - 459 kN Side Double Clamp Vibratory Pile Driver for Limited Height Applications | ±30° tilt and 360° rotation for 20-25t excavators
Description:
YEKUN Weiboro SV-200 is a side-mounted dual grip vibratory pile driver specifically designed for projects where headroom is measured in centimeters rather than metres. Unlike standard vibratory pile drivers that require a vertical boom height, this low floor specialist allows the excavator to load and retrieve piles inside factory floors, under bridges or in parking lots where ceiling heights are limited to 4 meters or less.
Key Features -two-way tilt ±30° in combination with two independent gripping systems. The side grip holds the pile laterally, while the bottom grip provides vertical support. By turning the entire hammer assembly to its side, the operator can push the pile horizontally into a confined space and then return the hammer to the vertical position for driving. No additional equipment is required - one machine handles clamping, positioning, insertion and extraction.
The dual-circuit gripping system provides 335 kN of side gripping and 385 kN of bottom gripping. The grips use one hydraulic circuit, but can be controlled independently, which allows you to reliably fix piles of complex shapes (I-beams, sheet piles, pipes) without readjustment. Quick-change grip inserts allow you to work with pile thicknesses from 10 mm to 50 mm.
The characteristics are ideally suited to a 20-25t excavator. Centrifugal force reaches 459 kN at a variable frequency of 2300-3000 rpm, eccentricity 4.6 kg m. The SV-200 is capable of handling piles up to 10 meters in length, which is typical for factory floor foundations, bridge approach slabs and tunnel supports. The total weight of the hammer with adapter and grips is 2280 kg, which is within the lifting capacity of a 22-ton excavator with the boom fully extended.
Continuous 360° rotation with tilt is a key benefit. The hammer rotates continuously thanks to an internal rotating hydraulic manifold, and a ±30° tilt cylinder allows the entire head to be tilted sideways. This makes it possible to work under obstacles: the pile can be driven under the bridge beam and then straightened after passing the obstacle. These movements allow you to dive where a traditional hammer or guide does not physically fit.
Installation on a standard 20-25t excavator requires minimal factory modification - usually replacing the bucket adapter with a special mounting bracket and connecting two auxiliary hydraulic lines. The entire installation takes one business day. Once installed, the operator controls tilt, rotation, grip and vibration directly from the cab using standard joysticks and pedals.
For contractors working in height-constrained environments - shop expansions, under-bridge repairs or urban tunneling - the YEKUN Weiboro SV-200 transforms a standard 20-25t excavator into a low-height slab specialist, capable of clamping, tilting, loading and retrieving piles without leaving the cab.
contact us
Related Popular Products
FV-280 Series Photovoltaic Pile Driving/Extraction Machine
Specialized solar farm pile driver 12m PV pile specialist Fits 20-30t excavators High torque eccentricity Clay and weathered rock breaker Reinforced box structure Energy saving dual pump fusion
Mini pile driving/extraction machine FV-100 series
Ultra-compact pile driving in limited spaces Tool for foundation work in rural renovation Attachments for 7-12t excavator Wood and concrete pile specialist Installation for narrow drainage channels Lightweight vibrating hammer Portable single-operator pile driving
Mini pile driving/extraction machine FV-150 series
Fourth generation compact vibrator Piling hammer for 8m steel sheet piling Solution for pile driving in municipal trenches Optimized for 12-17 tonne class Two-stage vibration for heavy clay Low transport height (1898mm) Quick coupler mounting system
FV-350S Series Photovoltaic Pile Driving/Extraction Machine
High-performance piling hammer for photovoltaic installations Additional penetration force of 505 kN Capable of working with piles up to 14 m in length Upgrade of 36-40 t class excavator Pebble and caliche conqueror Reinforced eccentric shaft Continuous duty cycle 10 hours
SV-400 Series Side Clamping Pile Driving/Extraction Machine
Heavy duty piling hammer for limited access 656kn dual grip vibratory driver Independent side and bottom grip logic Compatible with 32-40t high-torque excavators Under-beam pile pulling mode Cast steel inclined bracket (360°/±30°) Possibility of reconstruction of column-free foundations Force conservation at low installation heights
FV-550 Series Four Eccentric Pile Driving/Extraction Machine
Transitional class 50-55 tons Medium heavy excitation 780 kN Capable of working with steel and concrete 18 m long Instant second stage kickdown Compact for its power class Cartridge valve replacement in 30 minutes Specialist in pile driving on reclaimed land
FV-250R Series 360° Rotating Pile Driving/Extraction Machine
Fully rotating piling head Tubing-free vibration system 90 ton axial load slewing ring Swivel ring with constant zero play High-pressure rotary fitting (40 MPa) Vibration installation with hose guidance Optimized for medium-sized excavators (20-25 tons) Friction-free design
SV-300 Series Side Clamping Pile Driving/Extraction Machine
specialized vibratory loader for objects with limited height double gripping system with independent control vibration force 558 kN of the medium heavy class ready-made solution for working in low clearance conditions optimal integration with excavators weighing 25–32 t swivel-tilt head 360° / ±30° dual-circuit gripping system (side 385 kN + bottom 490 kN) solution for driving piles under beams and ceilings
FV-600 Series Four Eccentric Pile Driving/Extraction Machine
920 kn ultra-high centrifugal force Largest class of excavators 55-70 t Pile driving for ultra-deep foundations 21 m Offshore wind and deep water bridges Projected moment 12.5 kg m Valve block with IP67 protection Bearing life 3000 hours Driving in one pass without drilling
Electric Vibrating Hammer DZ90A
Electric vibrator dz90a Balanced loader 450 kn Medium power vibrator motor 90 kw Optimal high frequency vibrator 1050 rpm Single jaw quick pile grab system Compatible with 50 t cranes Dual mode extraction force 200 kn Weatherproof remote control (IP65)
Hydraulic Impact Hammer HDY22
Heavy duty hydraulic impact hammer hdy22 Impact energy 330 knm for deep driving of piles Impact mass 22 tons Fixed impact stroke 1500 mm Adjustable impact frequency 20-70 beats/min Compatible with d-series hydraulic power units Reinforced leader and undercarriage Expert in driving large diameter piles
FV-500 Series Four Eccentric Pile Driving/Extraction Machine
759 kN "nearly 800" class hammer peak match to 48-52 t excavator clamping force 814 kN for I-beams device for driving heavy 18 m long piles in one pass extreme eccentricity moment 8.8 kg m malleable shaft + high-strength low-alloy steel housing bearing service interval 2000 hours
FV-800 Series Four Eccentric Pile Driving/Extraction Machine
Ultimate excitation force Ultra-deep penetration Flagship carrier 75-85 t Pile driving up to 27 m in one pass Huge eccentric moment 14.5 kgm Double-lock clamping system Robot-welded body made of high-strength low-alloy steel
Taiwan PCF-450 series pile driving/extraction machine
Vibrator pcf-450 of prefabricated modular design Centrifugal force of 535 kn, confirmed by real objects High frequency drive 3300 rpm Compatible with excavators weighing 47–55 t Fully unified architecture of components Pile driving to a depth of 18 m Modular box-shaped design with bolted connections Quick-change bearing module for field service
Electric Vibrating Hammer DZ150A
Electric vibrator dz150a Heavy duty 1000 kn vibrator for crane operation High torque 150 kW vibrator motor Low frequency high amplitude action (940 rpm) Replaceable single and double gripper system Compatible with cranes with lifting capacity from 80 t Allowable pile extraction force 400 kn Dustproof remote control station
FV-330 Series Photovoltaic Pile Driving/Extraction Machine
Medium-large pile driving for photovoltaic installations Efficiency in the 33-36 ton class Balanced excitation 372 kN Clamping for two materials: steel and concrete 12 m deep solar power plant foundation German heavy duty bearing Stable on hilly terrain