Products
-
Electric Vibrating Hammer DZ60A
-
Hydraulic Impact Hammer HDY25
-
SV-400 Series Side Clamping Pile Driving/Extraction Machine
-
FV-330 Series Photovoltaic Pile Driving/Extraction Machine
-
HDY5 Hydraulic Impact Hammer
-
Taiwan PCF-450 series pile driving/extraction machine
-
High Frequency Vibrating Hammer FV-350
-
FV-250R Series 360° Rotating Pile Driving/Extraction Machine
-
Taiwan PCF350 Series Pile Driving/Extraction Machine
-
FV-280R Series 360° Rotating Pile Driving/Extraction Machine
-
SV-200 Series Side Clamping Pile Driving/Extraction Machine
-
Electric Vibrating Hammer DZ150A
-
SV-300 Series Side Clamping Pile Driving/Extraction Machine
-
Hydraulic Vibrating Hammer HV-80
-
FV-550 Series Four Eccentric Pile Driving/Extraction Machine
-
FV-350S Series Photovoltaic Pile Driving/Extraction Machine
SV-500 Series Side Clamping Pile Driving/Extraction Machine
Maximum power pile installation for limited space
Vibrator with double gripper 772 kn
Independent grip calibration
Optimal compatibility with 40–50 t excavators
Adaptive tilt under limited height (360°/±30°)
Two-way capture logic (side 465 kn + bottom 550 kn)
Installation of piles in conditions of low floor heights
Full cycle of operation with one machine
Description
marker
YEKUN Weiboro SV-500 – Maximum Power Piling Machine for Limited Space | Vibrator with double gripper 772 kN and independently calibrated grippers for 40–50 t excavators
Description:
YEKUN Weiboro SV-500 is a maximum power piling installation for working in confined spaces. It provides the force of a double grip vibrator772 kN with an installation height of only3.2 m. Designed for excavators in the 40-50t class, it solves the classic problem of how to drive heavy piles where height is limited - for example, when expanding underground parking lots, in tunnel passages or when renovating buildings.
The main feature of the SV-500 isindependent calibration of grippers. Lateral grip develops force465 kN, lower -550 kN, while the pressure of each grip can be adjusted separately depending on the shape and condition of the pile surface. This system allows the operator to save presets for different types of piles (rusty sheet piles, slippery I-beams, rough concrete) and activate them with the touch of a button, eliminating manual tightening between cycles.
Two-way capture logic allows you to use only the bottom grip when leaning under an obstacle, and then connect the side one for maximum holding power in a vertical position. Or use both grips simultaneously when removing the pile. The system automatically balances pressure, preventing deformation of thin-walled tubular piles.
Adaptive tilt under limited height (360°/±30°) provided by a forged steel bracket that rotates continuously and tilts up to 30° to the left or right. This feature makes it easy to guide piles under floors: for example, under a mezzanine floor, a 14-meter pile is driven horizontally and then rotated vertically. Thanks to 360° rotation, there is no need to move the excavator to change the installation angle - just turn the hammer head.
Eccentricity7.6 kg m at variable frequency2 300–3 100about/min creates the required force of the vibratory driver 772 kN. This is sufficient to drive steel sheet piles up to15 m or concrete piles in compacted gravel. The total weight of the equipment with adapter and grips is4 050kg, which is ideal for 40-50t class excavators such asCaterpillar 349, Komatsu PC490 or Liebherr R950.
The SV-500 also performs excellently asfull cycle system on one machine. The operator from the cab can: pick up the pile from the stack (with the lower grip), tilt it under an obstacle, rotate it to a vertical position, load it using vibration and then remove it - without the participation of ground personnel. This eliminates slinging and manual positioning and improves safety and productivity.
For contractors who require a combinationlimited space and maximum immersion force — for example, when adding a new line of foundations inside an existing production —YEKUN Weiboro SV-500 converts a standard 40-50t excavator into a 772 kN dual jaw vibratory loader with independent jaw calibration and adaptive tilt. This proves that the possibility of installing piles at low slab heights does not require compromises in driving force.One machine, one operator, continuous work cycle even at minimum altitude.
contact us
Related Popular Products
High Frequency Vibrating Hammer FV-400
Piling for deep excavations up to 18m Suitable for large excavators 45-60t Progressive excitation 485kN Combined wall and tube pile installer Optimized for flow rates 350-450l/min Tungsten carbide coated jaws Heavy steel sheet pile specialist
SV-400 Series Side Clamping Pile Driving/Extraction Machine
Heavy duty piling hammer for limited access 656kn dual grip vibratory driver Independent side and bottom grip logic Compatible with 32-40t high-torque excavators Under-beam pile pulling mode Cast steel inclined bracket (360°/±30°) Possibility of reconstruction of column-free foundations Force conservation at low installation heights
Electric Vibrating Hammer DZ150A
Electric vibrator dz150a Heavy duty 1000 kn vibrator for crane operation High torque 150 kW vibrator motor Low frequency high amplitude action (940 rpm) Replaceable single and double gripper system Compatible with cranes with lifting capacity from 80 t Allowable pile extraction force 400 kn Dustproof remote control station
Electric Vibrating Hammer DZ60A
Electric vibratory hammer dz60a Vibratory hammer 570 kn with crane suspension Vibration-resistant electric motor with a power of 60 kW Eco-friendly and low-noise equipment for foundation construction Universal single-grip mechanism for various types of piles High-frequency vibration action 1100 rpm Compatible with cranes with a lifting capacity of 35 tons Intelligent system radio remote control
Mini pile driving/extraction machine FV-150 series
Fourth generation compact vibrator Piling hammer for 8m steel sheet piling Solution for pile driving in municipal trenches Optimized for 12-17 tonne class Two-stage vibration for heavy clay Low transport height (1898mm) Quick coupler mounting system
FV-280 Series Photovoltaic Pile Driving/Extraction Machine
Specialized solar farm pile driver 12m PV pile specialist Fits 20-30t excavators High torque eccentricity Clay and weathered rock breaker Reinforced box structure Energy saving dual pump fusion
Hydraulic Impact Hammer HDY22
Heavy duty hydraulic impact hammer hdy22 Impact energy 330 knm for deep driving of piles Impact mass 22 tons Fixed impact stroke 1500 mm Adjustable impact frequency 20-70 beats/min Compatible with d-series hydraulic power units Reinforced leader and undercarriage Expert in driving large diameter piles
Taiwan PCF350 Series Pile Driving/Extraction Machine
taiwan pcf-350 series vibratory pile driver Proven 470kn centrifugal force High frequency vibration 3500 rpm Optimal compatibility with 40-45t excavators Unified spare parts system Handles piles up to 15m long Prefabricated high-strength steel welded body Easy-to-maintain bearing design
High Frequency Vibrating Hammer FV-350
Larsen sheet piling device 15 m long Heavy hydraulics for 40-45 tons Medium heavy class 455 kn Tool for bridge foundations Eccentric moment 6.2 kg m Parallel self-centering clamp High flow auxiliary circuit (400 l/min)
FV-250R Series 360° Rotating Pile Driving/Extraction Machine
Fully rotating piling head Tubing-free vibration system 90 ton axial load slewing ring Swivel ring with constant zero play High-pressure rotary fitting (40 MPa) Vibration installation with hose guidance Optimized for medium-sized excavators (20-25 tons) Friction-free design
FV-330 Series Photovoltaic Pile Driving/Extraction Machine
Medium-large pile driving for photovoltaic installations Efficiency in the 33-36 ton class Balanced excitation 372 kN Clamping for two materials: steel and concrete 12 m deep solar power plant foundation German heavy duty bearing Stable on hilly terrain
Electric Vibrating Hammer DZ90A
Electric vibrator dz90a Balanced loader 450 kn Medium power vibrator motor 90 kw Optimal high frequency vibrator 1050 rpm Single jaw quick pile grab system Compatible with 50 t cranes Dual mode extraction force 200 kn Weatherproof remote control (IP65)
Hydraulic Impact Hammer HDY25
High stroke hydraulic impact hammer HDY25 Mega impact driving hammer 375 kNm 25 ton impact body Maximum piston stroke 1500 mm Adjustable blowing frequency: 20-70 blows per minute. D Series Dual Pump Power Plant Raised Height Chassis System Heavy Precast/Steel Piling Specialist
FV-600 Series Four Eccentric Pile Driving/Extraction Machine
920 kn ultra-high centrifugal force Largest class of excavators 55-70 t Pile driving for ultra-deep foundations 21 m Offshore wind and deep water bridges Projected moment 12.5 kg m Valve block with IP67 protection Bearing life 3000 hours Driving in one pass without drilling
Hydraulic Vibrating Hammer HV-80
A hydraulic vibratory driver is one of the main types of equipment for driving and removing piles when performing foundation work. High requirements for design and manufacturing quality determine its reliability and operational efficiency.
SV-200 Series Side Clamping Pile Driving/Extraction Machine
Lateral dual grip architecture Dedicated vibratory driver for low slab heights Two-way tilting ±30° Dual-circuit clamping system (side + bottom) Ability to install piles under obstacles Continuous 360° rotation with tilt Integration with 20-25t excavators Factory minimum modification for installation